JAGUAR FUEL INJECTOR SERVICE

                                        MOTORCYCLE AND MARINE INBOARD/OUTBOARD INJECTOR SERVICE

 

                                             You are on an internal page of the website   www.jaguarfuelinjectorservice.com

 

We have bench flow tested and ultrasonically cleaned thousands of fuel injectors for automotive engines on Jaguars,  Porsche, Chevrolet, Ford, VW, BMW, Chrysler, and many foreign make engines. Started testing in 2004 and now have 17 years of injector testing experience.

 

Having received many requests to service motorcycle and marine inboard and outboard injectors...we started testing those injectors back in 2012 and have the adapters required to mount many of those injectors to our  ASNU flow test bench.   The testing and cleaning process is the same for motorcycles and marine inboard and outboard injectors as it is for any automotive engine.

 

We can now flow test. clean, and service injectors for the following cycles.....  
 Suzuki, Honda, Yamaha, Harley, Buell and Ducati.  If not listed, send us an e-mail on your bike.  We will check it out.

We also flow test, clean and service many makes of marine inboard and marine outboard motors.
Suzuki, Honda, Mercury, Yamaha, Evinrude, Penta, Waverunners, Jetskis.  If not listed...send us an e-mail with your engine details.  We will check it out.

Flow testing your injectors on a purpose build flow machine gives you definitive results on the performance of your injectors.  There is no guessing if your injectors are flowing correctly.  We actually measure the flow output of each individual injector.  No guessing or seat of the pants speculation as with using pour in the tank cleaners, or engine fuel system flush/clean methods.  

 

We test flow rates, do a leak test, and inspect injector spray pattern as the injectors are received.  The results of the pretest determine if the injectors are within spec.  If out of spec, we ultrasonically clean the injectors, and then retest flow rates, recheck leak test, and recheck the spray pattern.  We also provide a complete written (or e-mail) report of the test results.  Both pre testing and post ultrasonically cleaning test.  

 

We stock a wide variety of injector o-ring sizes.  However, we may not have the o-rings available for your specific injector, and you may need to acquire these from your supplier. When you send in your injectors...leave all the seals and o-rings fitted.

 

Only $19.00 per injector.  Replacing o-rings, seals, and grommets is a bit extra....if necessary.  Return shipping is via USPS Priority mail to any continental US state.  Servicing time one to two days, excluding weekends and holidays.

 

We highly recommend you e-mail us with complete details on your bike or marine engine prior to sending your injectors.  We need your make, exact model, year, engine size, # of cylinders, and if you have it....the injector part number, and the manufacturer.

We also recommend to mark or label each injector with the specific cylinder from which it was removed.  If you think a specific cylinder is not firing, the pretesting of flows may assist in confirming your diagnosis.

 

E-mail us using this LINK   Call us for quicker response at  904-289-2020

Go to our website homepage at this LINK

 

Thanks,

Jaguar Fuel Injector Service
SD Faircloth
904-289-2020
14869 Yellow Water Lane
Jacksonville,  Florida   32234

 

This page last updated on Tuesday 10/19/2021.